MC74HC573ANG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 2.259996g |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Max Supply Current | 4μA |
| Number of Bits | 8 |
| Propagation Delay | 30 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 26 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 45 ns |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height | 3.556mm |
| Length | 27.1526mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74HC573ANG Overview
In the package 20-DIP (0.300, 7.62mm), it can be found. Tube is the way in which it is packaged. It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. According to Through Hole, this electronic part is mounted. A voltage of 2V~6V is used as the supply voltage for this device. A temperature of -55°C~125°C is set as the operating temperature. There are a number of FPGAs in this series, including this one. 8 Bits are used in the design of this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the 74HC573 family. It operates with a supply voltage of 3V. It is equipped with 20 pin count. HC/UH is the family name of this electronic device. Designed with 20 pins, it is compatible with a wide range of devices. The electronic part is mounted using the Through Hole method. This device has 2 ports on board, which are all available at the same time. This part can be found within the FF/Latches subcategory. Vsup reaches 6V as the maximum supply voltage. 2/6V power supplies are needed to operate it. It is recommended to have a higher supply voltage (Vsup) than 2V. This device is well suited for RAIL based on its reliable performance. The 7.8mA output current gives it maximum design flexibility. 3 output lines provide binary equivalents of input lines. It consumes 4μA of quiescent current without being affected by outside factors. In order to achieve its superior flexibility, 8 circuits are used.
MC74HC573ANG Features
20-DIP (0.300, 7.62mm) package
74HC series
8 Bits
74HC573 family
20 pin count
20 pins
2/6V power supplies
MC74HC573ANG Applications
There are a lot of ON Semiconductor MC74HC573ANG Latches applications.
- Double bus register system
- Display driver
- Buffer Storage
- Automotive HEV/EV Powertrain
- Multistage ripple counting
- Registers
- Automotive Body Electronics
- Parallel data storage
- Multi-line decoders
- Watches