MC74HC393AD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 74HC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC393 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 44 ns |
| Turn On Delay Time | 300 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Number of Input Lines | 1 |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 50MHz |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC393AD Overview
A 14-SOIC (0.154, 3.90mm Width)package is used for this device. In order to configure it, it uses 14terminations. The supply voltage of 3V enables it operate in a fully flexible way. In wires, 2elements are connected. The number of all component pins is 14. As [0], it is packaged. Circuit components are connected by 14pins. It is mounted in the way of [0]. It is included in the HC/UHfamily. Having been designed as a member of the 74HCseries, it is well suited for use in a wide range of applications. The logic type of Binary Counter is adopted. -55°C~125°Cshould be set as the operating temperature. Using a Surface Mountmounting type, it is mounted. Providing a voltage of 2V~6Vensures higher reliability of operation. The array contains elements that store 4bits each. Under its base part number of [0], you will find additional related parts. The packing of this product is performed by [0]. Supply voltages can be as low as 2V volts (Vsup). A maximum supply voltage (Vsup) is available up to 6V. There are 1 input lines that allow binary data to be input in the form of an on/off signal.
MC74HC393AD Features
Embedded in the 14-SOIC (0.154, 3.90mm Width) package
4 bits per element
MC74HC393AD Applications
There are a lot of ON Semiconductor MC74HC393AD Counters & Dividers applications.
- Dual Up Counters
- Control counters
- Frequency division
- Divide-by-N counting
- Signal gating
- Frequency dividing circuits
- Fixed and programmable counters greater than 10
- VHF, UHF, FM, AM, etc.
- SQUARE ROOT
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters