Parameters |
Factory Lead Time |
45 Weeks |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
172.98879mg |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2005 |
Series |
74HC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Frequency |
35MHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
74HC165 |
Function |
Parallel or Serial to Serial |
Number of Outputs |
1 |
Output Type |
Complementary |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Propagation Delay |
26 ns |
Quiescent Current |
4μA |
Turn On Delay Time |
265 ns |
Family |
HC/UH |
Logic Function |
Shift Register |
Direction |
Unidirectional |
Halogen Free |
Halogen Free |
Logic Type |
Shift Register |
Number of Bits per Element |
8 |
Trigger Type |
POSITIVE EDGE |
Number of Input Lines |
9 |
fmax-Min |
24 MHz |
Ambient Temperature Range High |
125°C |
Height |
1.2mm |
Length |
5.1mm |
Width |
4.5mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC74HC165ADTR2G Overview
This device can be found embedded within the package 16-TSSOP (0.173, 4.40mm Width). It sums up to 16 where the chip's terminations add up. There is a Tape & Reel (TR) case containing it. 3V is the part's operating supply voltage. It is equipped with a pin count of 16. It is recommended to mount by Surface Mount in order to get the best results. In this case, the electronic component belongs to the HC/UH. In Surface Mount, this component is mounted. The operating temperature ranges -55°C~125°C. Votage is supplied within 2V~6V. In this case, the electrical component belongs to the series 74HC. Similar parts can be found by searching for the 74HC165 family. It is recommended that this part's supply voltage (Vsup) must not be less than 2V. There are 9 input lines available in the device. There is a capability to deliver voltage at 2/6V. Ideally, the maximum supply voltage (Vsup) should not exceed 6V. The current is 4μA during quiescent operation. There is 35MHz frequency set on the device. 1 outputs are available on the part.
MC74HC165ADTR2G Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC165 family
It supplies 2/6V power
Quiescent Current at 4μA
MC74HC165ADTR2G Applications
There are a lot of ON Semiconductor MC74HC165ADTR2G Shift Registers applications.
- Parallel to serial converter
- data manipulation
- Data Format Converters
- data transfer
- Flash Memory
- 8-bit data storage
- Data manipulation
- Serial-to-parallel data conversion
- Data Processors
- LED matrix control