MC74ACT374DTR2
| Parameters | |
|---|---|
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT374 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 160MHz |
| Family | ACT |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.024 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Max Frequency@Nom-Sup | 90000000Hz |
MC74ACT374DTR2 Overview
It is embeded in 20-TSSOP (0.173, 4.40mm Width) case. D flip flop is embedded in the Tape & Reel (TR) package. This output is configured with Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. With a supply voltage of 4.5V~5.5V volts, it operates. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It belongs to the type D-Typeof flip flops. In terms of FPGAs, it belongs to the 74ACT series. You should not exceed 160MHzin the output frequency of the device. There are 1 elements in it. Despite external influences, it consumes 8μAof quiescent current. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. D latch belongs to the 74ACT374 family. An input voltage of 5Vpowers the D latch. A 4.5pFfarad input capacitance is provided by this T flip flop. ACTis the family of this D flip flop. This RS flip flops is a part number FF/Latches. Vsup reaches its maximum value at 5.5V. A normal operating voltage (Vsup) should remain above 4.5V. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The D latch operates on 5V volts. A total of 2ports are embedded in the D flip flop.
MC74ACT374DTR2 Features
Tape & Reel (TR) package
74ACT series
5V power supplies
MC74ACT374DTR2 Applications
There are a lot of ON Semiconductor MC74ACT374DTR2 Flip Flops applications.
- Bounce elimination switch
- Control circuits
- Balanced Propagation Delays
- Count Modes
- Storage Registers
- Dynamic threshold performance
- Functionally equivalent to the MC10/100EL29
- Latch-up performance
- Buffered Clock
- Single Up Count-Control Line