MC74AC374NG
| Parameters | |
|---|---|
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 60000000Hz |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 155MHz |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 8 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 3 |
MC74AC374NG Overview
20-DIP (0.300, 7.62mm)is the way it is packaged. D flip flop is included in the Tubepackage. This output is configured with Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. There is an electrical part that is mounted in the way of Through Hole. A supply voltage of 2V~6V is required for operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. In FPGA terms, D flip flop is a type of 74ACseries FPGA. A frequency of 155MHzshould be the maximum output frequency. The element count is 1 . It consumes 8μA of quiescent There are 20 terminations,This D latch belongs to the family of 74AC374. The D flip flop is powered by a voltage of 5V . This T flip flop has a capacitance of 4.5pF farads at the input. It is a member of the ACfamily of D flip flop. The electronic part is mounted in the way of Through Hole. A total of 20pins are provided on this board. It has a clock edge trigger type of Positive Edge. It is included in FF/Latches. There are 8bits in this flip flop. There is a 6Vmaximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be kept above 2V. In order to achieve its superior flexibility, 8 circuits are used. This D flip flop is equipped with 0 ports. High efficiency requires the supply voltage to be maintained at 5V. It is designed with 3 output lines.
MC74AC374NG Features
Tube package
74AC series
20 pins
8 Bits
MC74AC374NG Applications
There are a lot of ON Semiconductor MC74AC374NG Flip Flops applications.
- Pattern generators
- Common Clocks
- Shift Registers
- Asynchronous counter
- Convert a momentary switch to a toggle switch
- Digital electronics systems
- Event Detectors
- Memory
- Safety Clamp
- Power down protection