MC33879EK
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 500.907724mg |
| Packaging | Bulk |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 750mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 4MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 600mA |
| Temperature Grade | AUTOMOTIVE |
| Interface | SPI |
| Max Supply Voltage | 26.5V |
| Min Supply Voltage | 5.5V |
| Power Dissipation-Max | 1.7W |
| Nominal Supply Current | 24mA |
| Max Supply Current | 14mA |
| Current - Output | 600mA |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 26.5V |
| Halogen Free | Not Halogen Free |
| Fault Protection | Over Voltage |
| Turn On Time | 100 µs |
| Supply Voltage1-Nom | 13V |
| Turn Off Time | 50 µs |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.65mm |
| Length | 11mm |
| Width | 7.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
MC33879EK Overview
You can find it in the SOIC package.Bulk-shaped packaging is used for this product.There are 32 terminations in total.A device's terminal position is DUAL.32 pins make up the entire device.High efficiency can be achieved with a voltage supply of 5V.This device uses 32 pins for operation.Stable operation is enabled by a maximum operating temperature of 125°C°C.Hot-swappable device functions at a minimum working temperature of -40°C degrees Celsius in order to maintain reliabilHot-swappable devicey.By default, it produces output 8.A maximum supply voltage of 26.5VV can be handled by it.Hot Swap can work wHot Swaph as low a supply voltage as feasible, such as 5.5VV.600mA is the maximum output current required to meet the operation criteria.Hot Swap operates at a maximum current of 14mA.750mOhm-resistance is one of the characteristics of the device.
MC33879EK Features
The terminal position of 32
MC33879EK Applications
There are a lot of Freescale Semiconductor, Inc. (NXP Semiconductors) MC33879EK hot swap controllers applications.
- Network switch
- Active current limit
- Identify faulty boards
- Current monitoring
- Electric vehicle
- USB interface
- Short circuit protection
- Redundant Array of Disks (RAID)
- Industrial computers and servers
- Power monitoring