MC33232PG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -20°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| Series | SMARTMOS® |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Voltage - Supply | 12V~25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33232 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 12V |
| Power Supplies | 12V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Operating Supply Current | 6.5mA |
| Input Voltage (Min) | 12V |
| Output Current-Max | 0.75A |
| Supply Current-Max (Isup) | 20mA |
| Switcher Configuration | SINGLE |
| Mode | Critical Conduction (CRM) |
| Current - Startup | 50μA |
| Height Seated (Max) | 4.45mm |
| Width | 7.62mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC33232PG Overview
In a 8-DIP (0.300, 7.62mm) package, it is available.A Tube-packaging method was used to package it.The device's mounting type is Through Hole.With a voltage supply of 12V~25V, it should work.There is a setting on the device to operate at -20°C~85°C.As well as POWER FACTOR CONTROLLER ICs, the part has other IC types.On the gadget, there are a number of 8 terminals that can be found.It is currently set to 50μA at startup.The pin number of the component remains 8.One of the device's best parts is that it has a number of MC33232 on it.A 8 pin sum is present in it.It can function with a minimum input voltage of 12V.I suppose it can be considered a subclass of Switching Regulator or Controllers.As long as the frequency is kept constant at 1MHz, it is possible to continue to operate with good accuracy.There is a mountain on the other side of it called Mount Through Hole.In terms of output current, it works at the maximum in 0.75AIt is always necessary to power the component with a 12V volt supply in order for it to operate.Isup, or the maximum supply current, shall not exceed 20mA.Supplies for the device are 12V.There is a 6.5mA supply current set for the gadget.It is part of the SMARTMOS? Series.
MC33232PG Features
MC33232PG Applications
There are a lot of ON Semiconductor MC33232PG PFC PMICs applications.
- Video equipment
- Bypass circuit
- Low-voltage microprocessor power supplies
- EPS (Electric Power Steering)
- Communication device
- Embedded systems
- Camera
- RF (Radio Frequency)
- Set top boxes
- Smartcard