MC33152VDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 560mW |
| Technology | BIPOLAR |
| Voltage - Supply | 6.1V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC33152 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Nominal Supply Current | 10.5mA |
| Power Dissipation | 560mW |
| Propagation Delay | 55 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 55 ns |
| Halogen Free | Halogen Free |
| Rise Time | 36ns |
| Fall Time (Typ) | 32 ns |
| Rise / Fall Time (Typ) | 36ns 32ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.6V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC33152VDR2G Overview
The 8-SOIC (0.154, 3.90mm Width) package offers greater flexibility.A packaging method of Tape & Reel (TR) is indicated.The configuration is supported by 2 drivers.In this case, gate drivers is mounted along the way of Surface Mount.Using a 6.1V~18V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.There is a gate type of N-Channel MOSFET in this design.Temperature range -40°C~150°C TJ is allowed for this device.Mosfet driver uses Non-Inverting as Mosfet drivers input type.As a result of its configuration, it contains a maximum of 8 terminations.The base part number MC33152 refers to a number of related parts.Mosfet driver is mounted using the Surface Mount method.At the time of design, it is configured with 8 pins.Mosfet driver is designed specifically to run on 12V volts of power.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.There is a maximum output current of 1.5A that can be achieved.Its subcategory of MOSFET Drivers contains various useful electronic components.Components with 8 pins are available.The maximum power dissipation of 560mW shows its maximum capability to transfer and conduct power loss without overheating.
MC33152VDR2G Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 560mW
MC33152VDR2G Applications
There are a lot of ON Semiconductor MC33152VDR2G gate drivers applications.
- PCMCIA applications
- Isolated Supplies for controller area network (CAN),
- Isolated Gate Driver Supplies
- Commercial and agricultural vehicles (CAV)
- UPS systems
- serial peripheral interface (SPI), I2C
- DC-DC Converters
- Power factor correction (PFC) circuits
- Portable Media Players
- 3-Phase Motor Inverter Driver