MC14174BDR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 4000B |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 4174 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Clock Frequency | 15.5MHz |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 8.8mA 8.8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 120ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Propagation Delay (tpd) | 400 ns |
| Max Frequency@Nom-Sup | 2000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
MC14174BDR2 Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). You can find it in the Tape & Reel (TR)package. Non-Invertedis the output configured for it. It is configured with a trigger that uses a value of Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. It operates with a supply voltage of 3V~18V. The operating temperature is -55°C~125°C TA. This D latch has the type D-Type. It is a type of FPGA belonging to the 4000B series. You should not exceed 15.5MHzin the output frequency of the device. In total, there are 1 elements. It consumes 20μA of quiescent Terminations are 16. You can search similar parts based on 4174. It is powered by a voltage of 5V . Its input capacitance is 5pF farads. There is a base part number FF/Latchesfor the RS flip flops. A normal operating voltage (Vsup) should remain above 3V. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL.
MC14174BDR2 Features
Tape & Reel (TR) package
4000B series
MC14174BDR2 Applications
There are a lot of ON Semiconductor MC14174BDR2 Flip Flops applications.
- Bounce elimination switch
- Guaranteed simultaneous switching noise level
- Modulo – n – counter
- ATE
- Divide a clock signal by 2 or 4
- Storage registers
- High Performance Logic for test systems
- Consumer
- Asynchronous counter
- ESD protection