MC14094BDR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Cut Tape (CT) |
| Published | 2000 |
| JESD-609 Code | e0 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Number of Circuits | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Number of Bits | 8 |
| Propagation Delay | 270 ns |
| Turn On Delay Time | 840 ns |
| Logic Function | Latch, Shift Register |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 3 |
| Count Direction | RIGHT |
| Length | 9.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC14094BDR2 Overview
SOIC is the package in which the device is embedded. It sums up to 16 where the chip's terminations add up. The case Cut Tape (CT) contains it. A voltage of 5V is specified for the part's operating supply. On this part, there are 1 elements. Devices with 16 pins are available. It is recommended to mount by Surface Mount. As far as the device is concerned, there are 3 input lines available. It has a total of 8 pins. In total, it has 16 pins. Under temperatures below 125°C, it is recommended to use it. In order to operate the device, the value should not fall below -55°C. We use this supply voltage under 18V. It is used at a higher voltage than 3V. This subcategory falls under the Shift Registers category. There are 2 circuits in this device.
MC14094BDR2 Features
With 16 pins
MC14094BDR2 Applications
There are a lot of ON Semiconductor MC14094BDR2 Shift Registers applications.
- data manipulation
- temporary data storage
- Dual-rank shift, hold, and bus applications
- 7-segment display control
- Delay Line
- Parallel to serial converter
- Sequence generator
- Parallel data
- Data Format Converters
- Remote control holding register