MC14076BDR2
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 4076 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Clock Frequency | 12MHz |
| Current - Quiescent (Iq) | 20μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8.8mA 8.8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 180ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Propagation Delay (tpd) | 600 ns |
| fmax-Min | 6 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 4000B |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
MC14076BDR2 Overview
16-SOIC (0.154, 3.90mm Width)is the way it is packaged. D flip flop is included in the Tape & Reel (TR)package. In the configuration, Tri-State, Non-Invertedis used as the output. It is configured with a trigger that uses Positive Edge. Surface Mountmounts this electrical part. It operates with a supply voltage of 3V~18V. It is operating at a temperature of -55°C~125°C TA. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 4000B series. It should not exceed 12MHzin its output frequency. A total of 1 elements are present. There is a consumption of 20μAof quiescent energy. It has been determined that there have been 16 terminations. The 4076 family contains this object. The power supply voltage is 5V. A 5pFfarad input capacitance is provided by this T flip flop. This RS flip flops is a part number FF/Latches. For normal operation, the supply voltage (Vsup) should be above 3V. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL.
MC14076BDR2 Features
Tape & Reel (TR) package
4000B series
MC14076BDR2 Applications
There are a lot of ON Semiconductor MC14076BDR2 Flip Flops applications.
- Memory
- Patented noise
- Count Modes
- Data transfer
- Bounce elimination switch
- Single Down Count-Control Line
- Storage registers
- Divide a clock signal by 2 or 4
- Latch
- ESD protection