MC14017BFEL
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 16 |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Counters |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -55°C |
| Operating Supply Voltage | 18V |
| Power Supplies | 5/15V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 10 |
| Family | 4000/14000/40000 |
| Logic IC Type | RING COUNTER |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 1000 ns |
| fmax-Min | 6.7 MHz |
| Count Direction | UP |
| Max Frequency@Nom-Sup | 2000000Hz |
| Load/Preset Input | NO |
| Mode of Operation | SYNCHRONOUS |
| Height Seated (Max) | 2.05mm |
| Length | 10.2mm |
| Width | 5.275mm |
| RoHS Status | RoHS Compliant |
MC14017BFEL Overview
16 terminations are used for its configuration. This device is fully flexible due to the supply voltage of [0]. The number of all component pins is 16. In the circuit, there are 16pins that connect other components. In this case, it belongs to the family of [0]. This device contains information in 10bits. There is a temperature grade of MILITARYon this device. TAPE AND REEL is employed for its packing. There is 5/15V voltage comes from the voltage source. In order to operate, it requires a voltage of [0]. As low as 3V Vsup is the minimum supply voltage. This electronic component is from the Counters family. It uses the logic IC type [0]. A temperature of 125°Cis usually set as the maximum operating temperature. As a general rule, it is recommended that the minimum operating temperature be set to -55°C.
MC14017BFEL Features
Operating supply voltage of 18V
RING COUNTER as logic IC type
MC14017BFEL Applications
There are a lot of ON Semiconductor MC14017BFEL Counters & Dividers applications.
- Timing applications
- Timers
- SQUARING
- ANALOG SIGNAL PROCESSING
- Time delay circuits
- Frequency dividing circuits
- VHF, UHF, FM, AM, etc.
- TRUE RMS-TO-DC CONVERSION
- MULTIPLICATION
- Divide-by"N" counters/frequency synthesizers