MC10XS3412JHFKR2
| Parameters | |
|---|---|
| Factory Lead Time | 22 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerQFN |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Feature | Internal PWM, Slew Rate Controlled, Watchdog Timer |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | S-XBCC-B16 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 20V |
| Power Supplies | 3.3/56/20V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | SPI |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~20V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 95 µs |
| Rds On (Typ) | 10m Ω, 12m Ω |
| Turn Off Time | 95 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.2mm |
| Length | 12mm |
| Width | 12mm |
| RoHS Status | ROHS3 Compliant |
MC10XS3412JHFKR2 Overview
A Tape & Reel (TR) is used to package it.It's included in the 24-PowerQFN package.The LED driver is mounted as Surface Mount.General Purpose is the type of switch owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 4.The LED driving board operates with a supply voltage of 3V~5.5V.The maximum output voltage is N-Channel volts.Features of the lighting driver are Internal PWM, Slew Rate Controlled, Watchdog Timer.In total, there are 16 terminations.As far as the lighting driver is concerned, there are 4 functions.High efficiency is possible when the supply voltage is set to 12V.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The LED driver is configured with a maximum supply voltage of 20V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 6V.In this case, the power supply is 3.3/56/20V.
MC10XS3412JHFKR2 Features
Supplied from 12V
MC10XS3412JHFKR2 Applications
There are a lot of NXP USA Inc. MC10XS3412JHFKR2 Power Switches ICs applications.
- Solid State Drivers
- Wireless Modem Data Cards
- Hard Disk Drives
- Portable GPS Device
- Hot-Swap Systems
- Wireless Headsets
- Hot Swap
- Various applications equipped with buttons
- Set-top-box
- Set-Top Boxes