MC10H352FN
| Parameters | |
|---|---|
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 1 |
| Propagation Delay | 2 ns |
| Turn On Delay Time | 2.1 ns |
| Logic Function | Translator |
| Output Characteristics | OPEN-EMITTER |
| Output Polarity | COMPLEMENTARY |
| High Level Output Current | -50mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 50mA |
| Output Signal | PECL |
| Translator Type | Mixed Signal |
| Input Signal | CMOS |
| Output Latch or Register | NONE |
| Length | 8.965mm |
| Width | 8.965mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 10H |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Technology | ECL |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10H352 |
MC10H352FN Overview
20-LCC (J-Lead) contains it.The package is in the form of Tube.In its configuration, Differential is used as the output.There is a translator type of Mixed Signal for this electrical device.The electronic part is mounted using the Surface Mount method.There is Unidirectional channel type for this electrical device.Level translators operates at 0°C~75°C TA.In order to achieve its superior flexibility, 1 circuits are used.0 terminations are used to end transmission lines.Parts that are related to 10H352 can be identified based on its base part number.Power comes from a voltage of 5V.Pin count is 20.The device is part of the 10H series.The 20 pins are designed into it.There are 1 bits in this electronic part, which means it is designed in such a way.5.25V is the maximum supply voltage it can handle.This device requires a minimum voltage of 4.75V.This mount is done using the method of Surface Mount.4 channels are available.Power comes from a 5V supply.In order to achieve high efficiency, the supply voltage should be kept at 5V.
MC10H352FN Features
20-LCC (J-Lead) package
1 circuits
20 pin count
10H series
20 pins
5V power supplies
MC10H352FN Applications
There are a lot of ON Semiconductor MC10H352FN voltage translators & level shifters applications.
- Automotive infotainment
- PMBus
- One Fabrication Site
- One Assembly
- Servers
- Motor Drives
- Routers (routing equipment)
- Products With Many I
- Power-sensitive applications
- Test Site