MC10H176FNR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10H |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.9V~-5.46V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10H176 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Number of Bits | 6 |
| Clock Frequency | 250MHz |
| Propagation Delay | 2.2 ns |
| Turn On Delay Time | 1 ns |
| Family | 10H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 112mA |
| Output Characteristics | OPEN-EMITTER |
| Trigger Type | Positive Edge |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Number of Output Lines | 6 |
| fmax-Min | 250 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 250000000Hz |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10H176FNR2 Overview
It is packaged in the way of 20-LCC (J-Lead). It is included in the package Tape & Reel (TR). T flip flop uses Non-Invertedas its output configuration. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of -4.9V~-5.46Vis used as the supply voltage. Currently, the operating temperature is 0°C~75°C TA. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 10Hseries FPGA. It should not exceed 250MHzin its output frequency. There are 1 elements in it. As a result, it consumes 112mA of quiescent current without being affected by external factors. Terminations are 20. The object belongs to the 10H176 family. This D flip flop belongs to the family of 10H. There is an electronic part that is mounted in the way of Surface Mount. 20pins are included in its design. A Positive Edgeclock edge trigger is used in this device. This device has the base part number FF/Latches. It is designed with a number of bits of 6. Despite its superior flexibility, it relies on 7 circuits to achieve it. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. There are 6 output lines on it. 50mAis set as the high level output current. 50mAis set as the low level output current.
MC10H176FNR2 Features
Tape & Reel (TR) package
10H series
20 pins
6 Bits
MC10H176FNR2 Applications
There are a lot of ON Semiconductor MC10H176FNR2 Flip Flops applications.
- Registers
- Balanced 24 mA output drivers
- EMI reduction circuitry
- High Performance Logic for test systems
- ATE
- Modulo – n – counter
- Instrumentation
- Single Up Count-Control Line
- Clock pulse
- Cold spare funcion