| Parameters |
| Mounting Type |
Through Hole |
| Package / Case |
16-DIP (0.300, 7.62mm) |
| Surface Mount |
NO |
| Operating Temperature |
0°C~75°C TA |
| Packaging |
Tube |
| Series |
10H |
| JESD-609 Code |
e0 |
| Pbfree Code |
yes |
| Part Status |
Obsolete |
| Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
| Number of Terminations |
16 |
| Type |
JK Type |
| Terminal Finish |
TIN LEAD |
| Technology |
ECL |
| Voltage - Supply |
4.9V~5.46V |
| Terminal Position |
DUAL |
| Peak Reflow Temperature (Cel) |
240 |
| Time@Peak Reflow Temperature-Max (s) |
30 |
| Function |
Set(Preset) and Reset |
| Qualification Status |
COMMERCIAL |
| Output Type |
Differential |
| Number of Elements |
2 |
| Clock Frequency |
250MHz |
| Family |
10H |
| Output Polarity |
COMPLEMENTARY |
| Number of Bits per Element |
1 |
| Trigger Type |
Positive Edge |
| Height Seated (Max) |
4.44mm |
| RoHS Status |
Non-RoHS Compliant |
MC10H135P Overview
In the form of 16-DIP (0.300, 7.62mm), it has been packaged. As part of the package Tube, it is embedded. T flip flop uses Differentialas its output configuration. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Through Hole. Powered by a 4.9V~5.46Vvolt supply, it operates as follows. A temperature of 0°C~75°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as JK Type. In this case, it is a type of FPGA belonging to the 10H series. In order for it to function properly, its output frequency should not exceed 250MHz. D latch consists of 2 elements. A total of 16 terminations have been made. In this case, the D flip flop belongs to the 10Hfamily.
MC10H135P Features
Tube package
10H series
MC10H135P Applications
There are a lot of Rochester Electronics, LLC MC10H135P Flip Flops applications.
- Modulo – n – counter
- Frequency division
- Balanced Propagation Delays
- Automotive
- Synchronous counter
- Set-reset capability
- Common Clocks
- Storage registers
- Bus hold
- QML qualified product