MC10EP33DTR2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP33 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Reset | Asynchronous |
| Family | 10E |
| Halogen Free | Halogen Free |
| Logic Type | Divide-by-4 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Propagation Delay (tpd) | 0.44 ns |
| Power Supply Current-Max (ICC) | 34mA |
| Max Frequency@Nom-Sup | 4000000000Hz |
| Count Rate | 4GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10EP33DTR2G Overview
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)is a package in which this device is packaged. It is configured using 8terminations. The supply voltage of 3.3V enables it operate in a fully flexible way. The 1elements are connected by wires. The total number of component pins is 8. As a result, it is packaged as Tape & Reel (TR). In the circuit, 8pins are used to connect other components. It is mounted in the way of [0]. It emerges as a member of 10E family. The 10EPseries offers a wide range of applications due to its versatility. Logic type Divide-by-4 is adopted. It is recommended to set the operating temperature to -40°C~85°C. This device is mounted in the Surface Mountposition. When the supply voltage is set to [0], it is able to operate with greater reliability. It is possible for the result to be yesin Pbfree code. This electronic device is equipped with the following features [0]. Further related parts can be found under its base part number 10EP33. As a result of the voltage source, there is -5.2V voltage. A voltage of 3V is the minimum supply voltage (Vsup). Up to 5.5Vis the maximum supply voltage (Vsup). The electronic part belongs to the Prescaler/Multivibrators family. Data and clock inputs are configured at [0].
MC10EP33DTR2G Features
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
MC10EP33DTR2G Applications
There are a lot of ON Semiconductor MC10EP33DTR2G Counters & Dividers applications.
- Timers
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Timing applications
- SQUARING
- Frequency dividing circuits
- Clocks
- Frequency dividers
- ANALOG SIGNAL PROCESSING
- Divide-by-N counting