MC10EP142MNR4G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE |
| Technology | ECL |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP142 |
| Function | Universal |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Propagation Delay | 800 ps |
| Turn On Delay Time | 825 ps |
| Family | 10E |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Halogen Free | Halogen Free |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 9 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 10 |
| Max Frequency@Nom-Sup | 3000000000Hz |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10EP142MNR4G Overview
There is a 32-VFQFN Exposed Pad package embedded with the device. There are 32 terminations on the chip. It is used to pack in Tape & Reel (TR) case. Voltage rating of the part is 3.3V. There are 1 elements on this part. It has 32 pins. Mounting by Surface Mount is recommended. Electronic components belong to the 10E group. This component is mounted in the way of Surface Mount. Operating temperatures are within the range of -40°C~85°C. Votage is supplied within 3V~5.5V. This electrical component belongs to the 10EP series. If you use the 10EP142 family, you can find parts that are similar. In terms of supply voltage, this chip operates within the range of 5V. This section has the following additional features: ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE. There must be a minimum supply voltage (Vsup) of 3V for this part. As far as the device is concerned, there are 10 input lines available.
MC10EP142MNR4G Features
With 32 pins
Mounted in Surface Mount type.
Based on 10EP142 family
Operate supply voltage at 5V
MC10EP142MNR4G Applications
There are a lot of ON Semiconductor MC10EP142MNR4G Shift Registers applications.
- data transfer
- Dual-rank shift, hold, and bus applications
- data manipulation
- Counter
- 7-segment display control
- Pseudo Random Pattern Generator
- ROM Chips
- Data Format Converters
- Parallel data
- Flash Memory