MC10EP142MNG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE |
| Technology | ECL |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP142 |
| Function | Universal |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Propagation Delay | 800 ps |
| Turn On Delay Time | 825 ps |
| Family | 10E |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Halogen Free | Halogen Free |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 9 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 10 |
| Max Frequency@Nom-Sup | 3000000000Hz |
| Height | 950μm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10EP142MNG Overview
There is an embedded device in the package 32-VFQFN Exposed Pad. The number of the chip's terminations sums up to 32. Presented in a case of Tube. Its operating supply voltage is rated at 3.3V. On this part, there are 1 elements. Devices with 32 pins are available. Using Surface Mount as a mount point is recommended. Electronic components fall under the category of 10E. The component is positioned in the way of Surface Mount. -40°C~85°C is the range of operating temperatures for the device. It is supplied with voltage within 3V~5.5V. This electrical component belongs to the 10EP series. The 10EP142 family can be used to find similar parts. In terms of supply voltage, this chip operates within the range of 5V. There are also the following additional considerations in this section: ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V; SIPO OPERATION ALSO AVAILABLE. There should be no less than 3V supply voltage (Vsup) for this part. 10 input lines are available on the device.
MC10EP142MNG Features
With 32 pins
Mounted in Surface Mount type.
Based on 10EP142 family
Operate supply voltage at 5V
MC10EP142MNG Applications
There are a lot of ON Semiconductor MC10EP142MNG Shift Registers applications.
- store data in digital form
- Interconnectors
- Cache memory in CPU
- temporary data storage
- Data manipulation
- 7-segment display control
- Parallel to serial converter
- Delay Line
- Remote control holding register
- Output expansion