MC10EL32DTG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 10EL |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | MATTE TIN |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | COMMERCIAL |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Reset | Asynchronous |
| Direction | Up |
| Logic Type | Divide-by-2 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Propagation Delay (tpd) | 0.6 ns |
| fmax-Min | 2600 MHz |
| Count Rate | 3GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MC10EL32DTG Overview
This is a device supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. In order to configure it, it uses 8terminations. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. In wires, 1elements are connected. The total number of component pins is 8. As a result, it is packaged in the way of a Tube. As a member of 10EL series, it is well suited for various applications. It is adopted that the logic type is [0]. It is recommended that the operating temperature be set to -40°C~85°C. Using a Surface Mountmounting type, it is mounted. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. The result may be nowhen expressing the result in Pbfree code. This electronic device is equipped with the following features [0]. Supply voltages can be as low as 4.2V volts (Vsup). It is possible to provide a voltage up to 5.7V (Vsup). This device is configured with 1 data/clock inputs.
MC10EL32DTG Features
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
MC10EL32DTG Applications
There are a lot of Rochester Electronics, LLC MC10EL32DTG Counters & Dividers applications.
- Clocks
- DIVISION
- Divide-by"N" counters/frequency synthesizers
- POWER COMPUTATION
- Programmable binary and decade
- Fixed and programmable counters greater than 10
- Signal gating
- ALGEBRAIC COMPUTATION
- Frequency dividing circuits
- Dual Up Counters