MC10E431FNR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10E431 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 3 |
| Clock Frequency | 1.1GHz |
| Propagation Delay | 850 ps |
| Turn On Delay Time | 700 ps |
| Family | 10E |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 132mA |
| Output Characteristics | OPEN-EMITTER |
| Number of Bits per Element | 1 |
| Trigger Type | Positive, Negative |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10E431FNR2 Overview
As a result, it is packaged as 28-LCC (J-Lead). D flip flop is embedded in the Tape & Reel (TR) package. T flip flop uses Differentialas the output. The trigger it is configured with uses Positive, Negative. This electronic part is mounted in the way of Surface Mount. A voltage of -4.2V~-5.7Vis required for its operation. It is operating at 0°C~85°C TA. The type of this D latch is D-Type. It belongs to the 10Eseries of FPGAs. A frequency of 1.1GHzshould be the maximum output frequency. This process consumes 132mA quiescents. A total of 28terminations have been recorded. Members of the 10E431family make up this object. Power is provided by a 5V supply. The electronic device belongs to the 10Efamily. A part of the electronic system is mounted in the way of Surface Mount. A total of 28pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. This RS flip flops is a part number FF/Latches. As soon as Vsup reaches 5.7V, the maximum supply voltage is reached. The supply voltage (Vsup) should be kept above 4.2V for normal operation. In order to achieve its superior flexibility, 3 circuits are used. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. It runs on -5.2Vvolts of power. As an additional reference, you may refer to electronic flip flop NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V. It is set to 50mAfor the high level output current. A 50mAvalue is set for low-level output current.
MC10E431FNR2 Features
Tape & Reel (TR) package
10E series
28 pins
-5.2V power supplies
MC10E431FNR2 Applications
There are a lot of ON Semiconductor MC10E431FNR2 Flip Flops applications.
- Memory
- Counters
- QML qualified product
- Clock pulse
- Pattern generators
- Power down protection
- Count Modes
- ESD protection
- Shift Registers
- 2 – Bit synchronous counter