MC10E175FNR2G
| Parameters | |
|---|---|
| Factory Lead Time | 25 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10E175 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Output Type | Standard |
| Circuit | 9:9 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Circuits | 3 |
| Nominal Supply Current | 132mA |
| Number of Bits | 9 |
| Propagation Delay | 975 ps |
| Quiescent Current | 110mA |
| Turn On Delay Time | 800 ps |
| Family | 10E |
| Logic Function | D-Type, Latch |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Logic Type | D-Type Transparent Latch |
| Trigger Type | LOW LEVEL |
| Number of Input Lines | 2 |
| Independent Circuits | 1 |
| fmax-Min | 700 MHz |
| Height Seated (Max) | 4.57mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10E175FNR2G Overview
In the package 28-LCC (J-Lead), it can be found. This package has the format of Tape & Reel (TR). Standard is used for the output it is configured with. This electrical device has a logic type of D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. A 4.2V~5.5V voltage supply is required for operation. The operating temperature is 0°C~85°C. The 10E series contains FPGAs of this type. The design of this electronic part is based on 9 bits. A device with this design has 28 terminations. 10E175 is its family. The device works with a voltage of 5V for its supply voltage. 28 pins are provided. This electronic device is categorized as a 10E electronic device. Designed with 28 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Surface Mount. This part can be found within the FF/Latches subcategory. When Vsup reaches 5.5V, the maximal supply voltage is reached. It contains 2 input lines where electronic circuits are present. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. Without external influences, it consumes 110mA of quiescent current. The superior flexibility of the system is achieved through its use of 3 circuits.
MC10E175FNR2G Features
28-LCC (J-Lead) package
10E series
9 Bits
10E175 family
28 pin count
28 pins
MC10E175FNR2G Applications
There are a lot of ON Semiconductor MC10E175FNR2G Latches applications.
- Four-bit storage with output enable
- A/D and D/A conversion
- Automatic test equipment
- Watches
- Parallel Input
- Parallel Input
- Serial Output Register
- Control circuits
- Address register
- Multistage ripple counting