MC10E143FNG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 10E |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 900MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10E143 |
| Function | Universal |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Bits | 9 |
| Propagation Delay | 1 ns |
| Turn On Delay Time | 1 ns |
| Family | 10E |
| Logic Function | Shift Register |
| Number of Inputs | 9 |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | Shift Register |
| fmax-Min | 700 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10E143FNG Overview
28-LCC (J-Lead) package contains the device. Chip terminations add up to 28. There is a Tube case containing it. A voltage of 5V is specified for the part's operating supply. A total of 1 elements can be found on this part. 28 pins are present on the device. Surface Mount is recommended for mounting. It is a component of the 10E. Its mounting method is Surface Mount. There is a range of temperatures 0°C~85°C for operation. Votage is provided within 4.2V~5.7V. The 10E series represents this electrical component. If you use the 10E143 family, you can find parts that are similar. There are also the following additional considerations in this section: NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V. There must be a minimum supply voltage (Vsup) of 4.2V for this part. It is recommended that the maximum supply voltage for this part is not greater than 5.7V (Vsup). A total of 9 bits are present on the IC chip. It runs at 900MHz.
MC10E143FNG Features
With 28 pins
Mounted in Surface Mount type.
Based on 10E143 family
MC10E143FNG Applications
There are a lot of ON Semiconductor MC10E143FNG Shift Registers applications.
- Serial-to-parallel data conversion
- Remote control holding register
- store data in digital form
- Dual-rank shift, hold, and bus applications
- Flash Memory
- Data manipulation
- data manipulation
- Output expansion
- Interconnectors
- Remote control holding register