MC10E142FN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 10E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10E142 |
| Function | Universal |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 3 |
| Propagation Delay | 1 ns |
| Turn On Delay Time | 1 ns |
| Family | 10E |
| Logic Function | Shift Register |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 9 |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 8 |
| fmax-Min | 700 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 700000000Hz |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10E142FN Overview
The device is embedded in 28-LCC (J-Lead) package. 28 is the number of terminations on the chip. The Tube case contains it. 5V is the operating supply voltage of the part. A total of 1 elements can be found on this part. It is equipped with a pin count of 28. Mounting by Surface Mount is recommended. The electronic component belongs to the 10E. As you can see, this component is mounted in the way of Surface Mount. The operating temperature ranges 0°C~85°C. Voltages within 4.2V~5.7V are supplied to the device. The 10E series is associated with this electrical component. If you use the 10E142 family, you can find parts that are similar. Additionally, please note the following: NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE. For this part, the minimum supply voltage (Vsup) should not be less than 4.2V. The device is capable of delivering voltage at -5.2V. It is recommended that the maximum supply voltage for this part is not greater than 5.7V (Vsup). 8 output lines are available for operation. An electronic device such as this one has 3 circuits in it.
MC10E142FN Features
With 28 pins
Mounted in Surface Mount type.
Based on 10E142 family
It supplies -5.2V power
With 8 output lines
MC10E142FN Applications
There are a lot of ON Semiconductor MC10E142FN Shift Registers applications.
- Parallel data
- Generate time delay toward digital circuits
- data manipulation
- Output expansion
- Sequence generator
- data transfer
- Cache memory in CPU
- Pulse Extenders
- Serial-to-parallel data conversion
- Data Processors