MC10E141FN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| Series | 10E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10E141 |
| Function | Universal |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 3 |
| Propagation Delay | 975 ps |
| Family | 10E |
| Logic Function | Shift Register |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| fmax-Min | 700 MHz |
| Count Direction | BIDIRECTIONAL |
| Max Frequency@Nom-Sup | 700000000Hz |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10E141FN Overview
28-LCC (J-Lead) is the package in which the device is embedded. A total of 28 terminations can be found on the chip. The Tube case contains it. This part has an operating supply voltage of 5V. There are 1 elements on this part. It is equipped with a pin count of 28. The recommended mounting method is Surface Mount. There is an electronic component in the 10E. This component is mounted in the way of Surface Mount. A temperature range of 0°C~85°C is used for operation. Voltages within 4.2V~5.7V are supplied to the device. Similar parts can be found using the 10E family. You can search for similar parts based on the 10E141 family. This section has the following additional features: NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE. Ensure that Vsup is not less than 4.2V when powering this part. The device is capable of delivering voltage at -5.2V. The maximum supply voltage (Vsup) for this part should not be more than 5.7V. In this device, there are 3 circuits that are active at the same time.
MC10E141FN Features
With 28 pins
Mounted in Surface Mount type.
Based on 10E141 family
It supplies -5.2V power
MC10E141FN Applications
There are a lot of ON Semiconductor MC10E141FN Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- Serial to parallel converter
- Interconnectors
- Pseudo Random Pattern Generator
- Data Format Converters
- Flash Memory
- Data manipulation
- store data in digital form
- Pattern Recognizers
- temporary data storage