MC100EP29DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100EP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP29 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Clock Frequency | 3GHz |
| Propagation Delay | 500 ps |
| Turn On Delay Time | 420 ps |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 57mA |
| Halogen Free | Halogen Free |
| Number of Bits per Element | 1 |
| Trigger Type | Positive, Negative |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EP29DTR2G Overview
The package is in the form of 20-TSSOP (0.173, 4.40mm Width). The Tape & Reel (TR)package contains it. As configured, the output uses Differential. There is a trigger configured with Positive, Negative. Surface Mountis positioned in the way of this electronic part. A supply voltage of -3V~-5.5V is required for operation. Temperature is set to -40°C~85°C TA. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 100EP series. Its output frequency should not exceed 3GHz Hz. It consumes 57mA of quiescent current without being affected by external factors. The number of terminations is 20. The 100EP29family includes it. Power is supplied from a voltage of 3.3V volts. Surface Mount mounts this electronic component. 20pins are included in its design. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. It reaches the maximum supply voltage (Vsup) at 5.5V. Keeping the supply voltage (Vsup) above 3V is necessary for normal operation. Using 2 circuits, it is highly flexible. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. In order for the device to operate, it requires -4.5V power supplies. Furthermore, it has NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5Vas a characteristic. A -50mAis set for the high level output current. 50mA is the low level output current.
MC100EP29DTR2G Features
Tape & Reel (TR) package
100EP series
20 pins
-4.5V power supplies
MC100EP29DTR2G Applications
There are a lot of ON Semiconductor MC100EP29DTR2G Flip Flops applications.
- Count Modes
- Event Detectors
- Asynchronous counter
- Automotive
- Balanced Propagation Delays
- Frequency Dividers
- Differential Individual
- Data transfer
- Shift Registers
- Common Clocks