MC100E241FNR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Frequency | 900GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100E241 |
| Function | Universal |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Propagation Delay | 975 ps |
| Turn On Delay Time | 975 ps |
| Logic Function | Shift Register |
| Number of Inputs | 9 |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | Shift Register |
| Number of Bits per Element | 8 |
| fmax-Min | 700 MHz |
| Count Direction | RIGHT |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100E241FNR2 Overview
28-LCC (J-Lead) is the package in which the device is embedded. A total of 28 terminations can be found on the chip. A Tape & Reel (TR) case is used to pack it. Parts with a 5V operating supply voltage are specified. The part consists of 1 elements. Devices with 28 pins are available. It is recommended that the mount should be done by Surface Mount. In Surface Mount, this component is mounted. A temperature range of 0°C~85°C is used for operation. There is a voltage supply within 4.2V~5.7V. This electrical component belongs to the 100E series. Search for similar parts based on the 100E241 family. Additional aspects of this section include: NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE. There should be no voltage less than 4.2V at the minimum supply voltage (Vsup). Devices with voltage delivery capabilities of -4.5V are available. This part requires a maximum supply voltage (Vsup) of 5.7V. 900GHz is the frequency of the device.
MC100E241FNR2 Features
With 28 pins
Mounted in Surface Mount type.
Based on 100E241 family
It supplies -4.5V power
MC100E241FNR2 Applications
There are a lot of ON Semiconductor MC100E241FNR2 Shift Registers applications.
- Pattern Recognizers
- Sequence generator
- Data Format Converters
- Remote control holding register
- data transfer
- Data Processors
- store data in digital form
- Generate time delay toward digital circuits
- Pseudo Random Pattern Generator
- Serial-to-parallel data conversion