MC100E142FN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| Series | 100E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100E142 |
| Function | Universal |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 3 |
| Propagation Delay | 1 ns |
| Turn On Delay Time | 1 ns |
| Logic Function | Shift Register |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 9 |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 8 |
| fmax-Min | 700 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 700000000Hz |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100E142FN Overview
This device can be found embedded within the package 28-LCC (J-Lead). It sums up to 28 where the chip's terminations add up. The Tube case contains it. 5V is the part's operating supply voltage. There are 1 elements on this part. There are 28 pins on the device. The mounting method should be Surface Mount. Its mounting method is Surface Mount. 0°C~85°C is the range of operating temperatures for the device. The voltage supplied to it is within the range of 4.2V~5.7V. It is part of the 100E series of electrical components. Based on the 100E142 family, you can search for similar parts. Additionally, this section contains the following: NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE. This part must have a minimum supply voltage (Vsup) of 4.2V. It can deliver voltage at -4.5V. The maximum supply voltage (Vsup) for this part should not be more than 5.7V. A total of 8 output lines need to be operated. In this device, there are 3 circuits.
MC100E142FN Features
With 28 pins
Mounted in Surface Mount type.
Based on 100E142 family
It supplies -4.5V power
With 8 output lines
MC100E142FN Applications
There are a lot of ON Semiconductor MC100E142FN Shift Registers applications.
- Serial to parallel converter
- Data manipulation
- Dual-rank shift, hold, and bus applications
- Parallel to serial converter
- 7-segment display control
- Data Processors
- Parallel data
- Cache memory in CPU
- Data Format Converters
- Flash Memory