MC100E141FN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100E141 |
| Function | Universal |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 3 |
| Propagation Delay | 975 ps |
| Logic Function | Shift Register |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| fmax-Min | 700 MHz |
| Count Direction | BIDIRECTIONAL |
| Max Frequency@Nom-Sup | 700000000Hz |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100E141FN Overview
As a result, 28-LCC (J-Lead) package contains the embedded device. 28 is the number of terminations on the chip. A Tube case holds it. Its operating supply voltage is rated at 5V. On this part, there are 1 elements. It is equipped with a pin count of 28. The recommended mounting method is Surface Mount. Mounting of this component is indicated by Surface Mount. There is a range of operating temperatures 0°C~85°C. The voltage supplied to it is within the range of 4.2V~5.7V. This electrical component belongs to the 100E series. If you use the 100E141 family, you can find parts that are similar. Additional aspects of this section are as follows: NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE. There must be a minimum supply voltage (Vsup) of 4.2V for this part. A voltage of -4.5V can be delivered by it. Vsup cannot exceed 5.7V for this part. 3 circuits are present in this device.
MC100E141FN Features
With 28 pins
Mounted in Surface Mount type.
Based on 100E141 family
It supplies -4.5V power
MC100E141FN Applications
There are a lot of ON Semiconductor MC100E141FN Shift Registers applications.
- store data in digital form
- Data Format Converters
- Counter
- 8-bit data storage
- temporary data storage
- ROM Chips
- Dual-rank shift, hold, and bus applications
- Output expansion
- Data manipulation
- Interconnectors