MAX970ESD+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 667mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX970 |
| Pin Count | 14 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 1.5/5.5V |
| Nominal Supply Current | 11μA |
| Max Supply Current | 11μA |
| Propagation Delay | 20 μs |
| Quiescent Current | 18μA |
| Response Time | 20000 ns |
| Common Mode Rejection Ratio | 56.48 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 50nA |
| Current - Quiescent (Max) | 18μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 0.05μA @ 5.5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 56.48dB CMRR, 80dB PSRR |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX970ESD+ Overview
In order to make transportation easier, it is packaged in 14-SOIC (0.154, 3.90mm Width) .The comparator has an output type of Open-Drain, Rail-to-Rail .We ship the part through Tube .There are14 terminals on the comparator.Electronic comparator is a part of Comparator family.A comparator supplied with 3V voltage can complete many demanding tasks.Electronic comparator can be classified as a General Purpose chip.Electronic comparator has a total of 4 elements.Electronic comparator includes 14 pins.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.Electronic comparator has 14 pins.Alternatively, you may search for MAX970 to find more pin-to-pin solutions for your specific needs.A quiescent current of 18μA is displayed by this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 11μA .If the current supply exceeds 11μA , the comparator could malfunction.The device can be operated with 1.5/5.5V power supplies.
MAX970ESD+ Features
Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 18μA
MAX970ESD+ Applications
There are a lot of Maxim Integrated MAX970ESD+ linear comparators applications.
- Set Top Boxes
- Alarm and Monitoring Circuits
- Appliances
- Mobile Phones
- Mobile Phones and Tablets
- Zero-Crossing Detectors
- Body Control Modules
- Point of load regulators
- Current and voltage sensing
- System control and monitoring