MAX941CPA
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch, Shutdown |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX941 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Supply Current-Max | 0.7mA |
| Response Time | 80 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Average Bias Current-Max (IIB) | 0.3μA |
| Supply Voltage Limit-Max | 6.5V |
| Current - Quiescent (Max) | 700μA |
| Voltage - Input Offset (Max) | 2mV @ 5.5V |
| Current - Input Bias (Max) | 0.15μA @ 5.5V |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Propagation Delay (Max) | 80ns |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX941CPA Overview
In order to make transportation easier, it is packaged in 8-DIP (0.300, 7.62mm) .This comparator is of the CMOS, Push-Pull, TTL output type.The chip is packaged with Tube .There are8 terminals on the comparator.The component belongs to the Comparator family of electrical components.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.A comparator of this type is typically of type with Latch, Shutdown .Currently, it consists of only 1 elements.The device includes 8 pins.In general, mounting type Through Hole is recommended.Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.The comparator is equipped with 8 pins.If you require more pin-to-pin solutions, search MAX941 for more options.3/5V power supplies are enough to run the device.As a minimum current, this part can be powered by 0.7mA .
MAX941CPA Features
CMOS, Push-Pull, TTL output capability
with Latch, Shutdown IC
Employing 1 elements
Operates under 0°C~70°C
MAX941CPA Applications
There are a lot of Maxim Integrated MAX941CPA linear comparators applications.
- Handheld Instruments
- High-Speed Differential Line Receiver
- Simple Analog-to-Digital Converters (ADCs)
- Mobile Phones
- Laptop Computers
- Notebooks and PDAs
- Battery-Powered Electronics
- Point of load regulators
- Limit Comparators
- Security Detection Systems