MAX9041BESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 25 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9041 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 2.5/5.5V |
| Output Current | 8mA |
| Propagation Delay | 450 ns |
| Quiescent Current | 100μA |
| Response Time | 400 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Average Bias Current-Max (IIB) | 0.025μA |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 450ns |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9041BESA+T Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .Output type CMOS, Push-Pull, Rail-to-Rail, TTL is used for this comparator.This device is designed in Tape & Reel (TR) case.Electronic comparator is possible to find the 8 terminals of the comparator.The chip belongs to Comparator .Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.This is a typical comparator of type with Voltage Reference .Electronic comparator consists of 1 elements in total.Electronic comparator has 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.Electronic comparator has 8 pins.In order to find a solution that meets your specific needs, search MAX9041 for more pin-to-pin solutions.A quiescent current of 100μA is displayed by this comparator.The board has a Surface Mount for mounting on a PCB or any other board.In order to run the device, there are only 2.5/5.5V power supplies required.
MAX9041BESA+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 100μA
MAX9041BESA+T Applications
There are a lot of Maxim Integrated MAX9041BESA+T linear comparators applications.
- Threshold Detectors
- RC Timers
- Lithium ion battery monitoring
- Body Control Modules
- Mobile Phones and Tablets
- Notebooks and PDAs
- Security Detection Systems
- Power Supervision
- Pulse, Squarewave, and Time Delay Generators
- Building automation