MAX903CPA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 28mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX903 |
| Pin Count | 8 |
| Output Type | TTL |
| Number of Circuits | 1 |
| Nominal Supply Current | 4mA |
| Max Supply Current | 4mA |
| Quiescent Current | 1.5mA |
| Response Time | 8 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Input Offset Voltage (Vos) | 4mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 10μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Current - Quiescent (Max) | 4mA 3mA 1.5mA |
| Voltage - Input Offset (Max) | 4mV @ ±5V |
| Current - Input Bias (Max) | 10μA @ ±5V |
| CMRR, PSRR (Typ) | 82.5dB CMRR, 80dB PSRR |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX903CPA+ Overview
For convenience, it is packaged in 8-DIP (0.300, 7.62mm) .Output type TTL is used for this comparator.The chip is packaged with Tube .As you can see, the comparator has8 terminals.Electronic comparator is a part of Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Speaking of types, this is a typical with Latch comparator.The device contains 8 pins.Electronic comparator is recommended to mount using type Through Hole .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.The comparator consists of 8 pins.Alternatively, you may search for MAX903 to find more pin-to-pin solutions for your specific needs.A quiescent current of 1.5mA is displayed by this comparator.There is a Through Hole for mounting it on a PCB or other board.Normally, the nominal supply current should be 4mA .A supply current exceeding 4mA may result in the comparator malfunctioning.
MAX903CPA+ Features
TTL output capability
with Latch IC
Operates under 0°C~70°C
Quiescent Current: 1.5mA
MAX903CPA+ Applications
There are a lot of Maxim Integrated MAX903CPA+ linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- Mobile Phones
- Motor drives
- System control and monitoring
- Limit Comparators
- Portable Battery Monitoring
- Consumer Medical Electronics
- Mobile Phones and Tablets
- Body Control Modules
- Analog front end