MAX892LEUA
| Parameters | |
|---|---|
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e0 |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX892 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Interface | On/Off |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Current - Output (Max) | 250mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Input Voltage (Min) | 3V |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.05mA |
| Switcher Configuration | BUCK |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 250m Ω |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
MAX892LEUA Overview
As you can see, it's packaged in the way of a Tube.It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package as well.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the type of switch owned by it.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The lighting driver has a total of 1 outputs that are available for use.Operation is based on a supply voltage of Not Required.A maximum output voltage of P-Channel volts can be achieved by this LED driver.The lighting driver has Status Flag features.There is a MAX892 family of things that it belongs to.It has a total of 8 terminations.There are 1 functions of the LED driver.From the lighting driver, there is a maximum output of 250mAV.8 pins are equipped with it.It uses an analog IC, which is SWITCHING REGULATOR.It has a maximum supply current of 0.05mA.
MAX892LEUA Features
MAX892LEUA Applications
There are a lot of Maxim Integrated MAX892LEUA Power Switches ICs applications.
- Hard Disk Drives
- Wearable Devices
- PC Cards
- HDD and SSD
- HDD, SSD
- Hot Swap
- Hot-Swap Systems
- Mobile Communication Devices
- PC Card Hot Swap
- Telecom and Network Systems