MAX808NEPA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CMOS RAM WRITE PROTECTION, BATTERY-BACKUP MODE |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX808 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Reset | Active Low |
| Voltage - Threshold | 4.575V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.09mA |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX808NEPA+ Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tube model. Please refer to this PMIC for 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. The purpose of this IC power is to provide you with a reference of 8-DIP (0.300, 7.62mm) functions. This IC power shares lots of benefits with other Battery Backup Circuit products. During the reflow process, a peak temperature of 260 is specified for the package. When a supply voltage of 5V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management system can be categorized as a Power Management Circuits chip. In total, the power management has 8 pins in it. The recommended mounting type is Through Hole. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As well as this, there are other features to mention such as [0], for example. It is always advisable to use MAX808, the base supervisor number, when searching for similar PMICs from the manufacturer. This power management requires 5V power to work.
MAX808NEPA+ Features
Battery Backup Circuit type
MAX808NEPA+ Applications
There are a lot of Maxim Integrated MAX808NEPA+ Voltage Supervisors applications.
- Personal computers
- Cloud computing
- Digitally controlled LDO regulators circuit
- Data storage applications
- Leakage protection
- Network equipment
- Radio
- Electric heating appliances
- Kitchen appliances
- Automotive permanent magnet synchronous motors