MAX792REPE+
| Parameters | |
|---|---|
| Max Supply Current | 150μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140 ms |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Threshold Voltage | 2.61V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 842mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.75V |
| Operating Supply Current | 150μA |
MAX792REPE+ Overview
This voltage supervisor has a total of 16 mounting terminals that can be used for mounting. Power management is packaged in a Tube way. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. There are PDIP functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 5V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. Through Hole mounts IC management. This power ic can be sub-categorized as Power Management Circuits. 16 pins are present in total in this power management. This power management system has 16 pins. IC management can only work with a supply voltage of 2.75V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The power management's supply current is 150μA. It is necessary to have 3/5V volts of power in order for this voltage supervisor to operate. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 150μA.
MAX792REPE+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.75V
150μA operating supply current
MAX792REPE+ Applications
There are a lot of Maxim Integrated MAX792REPE+ Voltage Supervisors applications.
- Magnetic resonance imaging
- Telecommunications equipment
- DVR
- Military communications
- Utility meter
- Urban rail transit weak current power monitoring
- Medical-specific isolation transformer
- Satellite navigation
- Digitally controlled LDO regulators circuit
- Rechargeable batteries