MAX691MJE/883B
| Parameters | |
|---|---|
| Factory Lead Time | 25 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | TIN LEAD |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 10mA |
| Max Supply Current | 10mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 35ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Screening Level | 38535Q/M;38534H;883B |
| Height Seated (Max) | 5.842mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MAX691MJE/883B Overview
This voltage supervisor has a total of 16 mounting terminals that can be used for mounting. Packaged in the form of a Tube, power management is easy to use. In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of 16-CDIP (0.300, 7.62mm) functions. There are a number of benefits that this PMIC has in common with other Battery Backup Circuit manage ics. During the reflow process, a peak temperature of 245 is specified for the package. Manage ics operate at 5V supply voltages. IC management conducts in a 1-voltage supply. By Through Hole, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 16 pins that are attached to IC management. The pins of the power management system count 16. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 4.75V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Through Hole. The temperature of the supervisors should be set to this range: -55°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Push-Pull. In order to maintain a stable supply current for the power management, 10mA is the recommended value. There is a requirement for 5V power to power this power management. At the most, voltage supervisor can work with a supply temperature of 10mA.
MAX691MJE/883B Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
10mA operating supply current
MAX691MJE/883B Applications
There are a lot of Maxim Integrated MAX691MJE/883B Voltage Supervisors applications.
- Leakage current detection
- Battery-powered equipment
- Power communication system
- Power distribution systems of ICU
- Network equipment
- Display equipment
- Embedded computing
- WiFi router
- Set top box
- Rechargeable batteries