MAX6848KAZD3+T
| Parameters | |
|---|---|
| Factory Lead Time | 111 Weeks |
| Mount | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.6V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 714mW |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Supply Current-Max (Isup) | 0.007mA |
| Min Reset Threshold Voltage | 600mV |
| Max Reset Threshold Voltage | 630mV |
| Threshold Voltage | +2.31V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Width | 1.625mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MAX6848KAZD3+T Overview
This package corresponds to SOT-23-8. IC POWER SUPPLY SUPPORT CIRCUIT is the device's analog IC. A total of 1 channels are available. The total number of pins is 8. Mount this part using Surface Mount. A minimum supply voltage of 1.6V volts is required for this part. An electrical component in this family is a Power Management Circuits. Supply voltage shouldn't exceed 5.5V volts for this chip. If you want to activate this device, it must be at least -40°C. At temperatures below 85°C, it is recommended that it be used. It is important to keep this device set to 3.6V at all times. In total, it has 8 pins. Ideally, the device should have a reset threshold voltage below 630mV. There should be a minimum reset threshold voltage over 600mV on the device. Unless specified otherwise, Isup (the maximum supply current) must not exceed 0.007mA.
MAX6848KAZD3+T Features
Available in SOT-23-8 Package
with 8 Pins
operate supply voltage at the range of 3.6V
The Min Reset Threshold Voltage at 600mV
MAX6848KAZD3+T Applications
There are a lot of Maxim Integrated MAX6848KAZD3+T Battery Management ICs applications.
- Providing battery protection
- Golf carts
- PV inverter
- Cell phone towers
- Washing machine
- Wireless charging
- Leisure
- Motor drive - 3 phase AC100V-240V AC servo
- ADAS Lidar
- Utility vehicles