MAX680EPA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930.006106mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | MAX680 |
| Function | Ratiometric |
| Number of Outputs | 2 |
| Output Voltage | 10V |
| Output Type | Fixed |
| Max Output Current | 10mA |
| Voltage - Input (Min) | 2V |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.5V |
| Analog IC - Other Type | SWITCHED CAPACITOR CONVERTER |
| Operating Supply Current | 2mA |
| Output Configuration | Positive and Negative (Dual Rail) |
| Max Output Voltage | 10V |
| Voltage - Output (Min/Fixed) | ±2Vin |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Frequency - Switching | 8kHz |
| Supply Current-Max (Isup) | 3mA |
| Synchronous Rectifier | No |
| Switcher Configuration | DOUBLER INVERTER |
| Max Duty Cycle | 50 % |
| Nominal Output Voltage | 10V |
| Height | 4.572mm |
| Length | 4.45mm |
| Width | 7.87mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX680EPA+ Overview
Using the Tube package, this voltage regulator optimizes the performance of the voltage regulator 12v. As you can see, this harley voltage regulator contains 8 terminations. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHED CAPACITOR CONVERTER type. Space-saving 8-DIP (0.300, 7.62mm) packages are available for this harley voltage regulator. A total of 2 outputs are configured in this voltage regulator. The adjusting voltage regulator generates Fixed output. There is a switching regulator that is compatible with the Through Hole mounting. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~85°C TA. A DC-DC switching regulator such as this one switches at 8kHz. Despite its low input voltage, this voltage regulator can operate. In this adjusting voltage regulator, the output voltage (Min/Fixed) equates to ±2Vin. A regulator voltage's peak reflow temperature amounts to 260 being indestructible. The voltage regulator 12v is designed to provide a nominal input voltage of 5V for operation. A voltage regulator 12v such as this falls under the Other Analog ICs category and belongs to this category. There is a DC/DC regulator in this family that belongs to the MAX680 family. Voltage can be produced at 10V volts by voltage regulator. For switching regulator operation, 8 pins are used. A 10mA A maximum output current is required to meet the switching regulator operation requirements. The maximum voltage of voltage regulator 12v DC DC switching regulator can produce is 10V, which is the highest available. In order to ensure reliable performance, the dc to dc voltage regulator's minimum supply voltage is 1.5V volts. There is a maximum input voltage of 6V that DC DC switching regulator can operate from. A supply current of 2mAmps is required to operate this DC-DC switching regulator.
MAX680EPA+ Features
2 outputs
Peak reflow temperature (Cel) of 260
8 pins
MAX680EPA+ Applications
There are a lot of Maxim Integrated MAX680EPA+ Voltage Regulators applications.
- Low output voltage switching power supply circuits
- Radio equipment
- Overvoltage protection circuits in TV sets
- Linear guide
- Game consoles
- ATMs
- Precision electronic equipment
- Industrial robots
- Cutting machine tools
- Adjustable voltage or current linear circuits