MAX6766TTZD0+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Regulator/Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1.9048W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.95mm |
| Base Part Number | MAX6766 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 6 |
| Output Voltage | 2.5V |
| Output Type | Fixed |
| Polarity | Positive |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 1 |
| Output Current | 100mA |
| Adjustable Threshold | YES |
| Quiescent Current | 50μA |
| Reset | Active Low |
| Min Input Voltage | 72V |
| Voltage - Threshold | 2.313V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 75μs Typical |
| Max Input Voltage | 72V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6766TTZD0+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. It is packaged with Tape & Reel (TR). To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes 6-WDFN Exposed Pad functions. Compared to other Regulator/Supervisor products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 260. During operation, the power ic is supplied with a voltage of 14V. IC management conducts in a 1-voltage supply. The mount is attached to Surface Mount. Power management has a total of 6 pins. There are 6 pins on the supervisor. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~125°C degrees. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. A similar IC managements number of the manufacturer can always be found by using MAX6766, the base power ics number.
MAX6766TTZD0+T Features
Regulator/Supervisor type
MAX6766TTZD0+T Applications
There are a lot of Maxim Integrated MAX6766TTZD0+T Voltage Supervisors applications.
- FPGA design
- Analog circuit
- Refrigeration
- Computer applications
- Microprocessor system
- Medical-specific insulation monitor
- Utility meter
- Medical-specific isolation transformer
- Kitchen appliances
- Fire equipment power monitoring system