MAX6439UTKTRD7+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Pbfree Code | yes |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Power Supplies | 1.2/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 695mW |
| Adjustable Threshold | NO |
| Min Reset Threshold Voltage | 2.535V |
| Max Reset Threshold Voltage | 2.665V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MAX6439UTKTRD7+T Overview
A SOT-23-6 package would be appropriate for this. This device uses an analog integrated circuit (IC) called POWER SUPPLY SUPPORT CIRCUIT. A total of 2 channels are available. Currently, there are 6 pins on it. Use Surface Mount to mount this part. Voltage must not drop below 1V volts to operate this part. In this case, it's a Power Management Circuits family component. It is recommended that the chip's supply voltage is 5.5V higher than 5.5V volts. This device must be activated by a value of -40°C. Temperatures less than 85°C degrees Celsius are recommended for use. The battery is powered by a volt of 1.2/5V. Total number of pins is 6. There should be a voltage below 2.665V as the minimum reset threshold voltage for the device. Devices should have a reset threshold voltage above 2.535V.
MAX6439UTKTRD7+T Features
Available in SOT-23-6 Package
with 6 Pins
The Min Reset Threshold Voltage at 2.535V
MAX6439UTKTRD7+T Applications
There are a lot of Maxim Integrated MAX6439UTKTRD7+T Battery Management ICs applications.
- Motor drive - single phase AC100V-240V non -isolated
- Refrigerator
- Rear light with dynamic control
- Ventilator
- Center information display (CID)
- Head up display (HUD)
- DC/DC converter
- Motor drive - 3 phase AC100V-240V AC servo
- Body ECU
- PV timeshift