MAX627EPA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Base Part Number | MAX627 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Nominal Supply Current | 8mA |
| Max Supply Current | 8mA |
| Input Type | Non-Inverting |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 25ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 µs |
| Length | 9.375mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX627EPA+ Overview
For greater flexibility, the 8-DIP (0.300, 7.62mm) package is adopted.Gate drivers is packaged in the way of Tube.Configuration is based on 2 drivers.Its recommended mounting way is Through Hole.When the supply voltage is 4.5V~18V it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel, P-Channel MOSFET gate.In this device, temperatures must not exceed -40°C~85°C TA.Non-Inverting is used as the input type in this program.There are 8 terminations to form the base of its configuration.Numerous related parts are available for its base part number MAX627.The device is mounted using Through Hole.The pins are configured with 8 when designing the chip.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 2A.There are various useful electronic components in its subcategory MOSFET Drivers.The number of component pins is 8.This device has a maximum power dissipation of 500mW, indicating that it is capable of reducing power loss without overheating.As a precaution, make sure the supply current is kept at 8mA.
MAX627EPA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 500mW
MAX627EPA+ Applications
There are a lot of Maxim Integrated MAX627EPA+ gate drivers applications.
- Motor Drives
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Industrial Motor Inverter - Power Tools, Robotics
- Line drivers
- Uninterruptible Power Supplies (UPS)
- Motor controllers
- 3-Phase Motor Inverter Driver
- Portable Media Players
- Broadcast equipment
- AC-DC Inverters