MAX5939FESA+
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Fault Timeout, Latched Fault, Thermal Limit |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Hot Swap Controller |
| Terminal Finish | MATTE TIN |
| Applications | -48V |
| Technology | BICMOS |
| Voltage - Supply | -80V~-20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Supply Voltage-Max (Vsup) | 80V |
| Supply Voltage-Min (Vsup) | 20V |
| Number of Channels | 1 |
| Adjustable Threshold | YES |
| Current - Supply | 700μA |
| Internal Switch(s) | No |
| Programmable Features | Circuit Breaker, Current Limit, OVP, UVLO |
| Feature Pins | OV, PWRGD, UV |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX5939FESA+ Overview
This is included in the 8-SOIC (0.154, 3.90mm Width) package.Currently, 1 channels can be accessed.The package resembles a Tube.Hot-swappable device terminates wHot-swappable deviceh 8 in total.Device DUAL is located at the terminal position.In total, there are 8 pins on it.High efficiency is possible at a voltage of 48V.The way it's set up is the way Surface Mount wants it.Hot-swappable device is classified as a Hot Swap Controller electrical component.A temperature setting of -40°C~85°C will ensure reliable operation.Devices with -48V applications are available.As you can see in Fault Timeout, Latched Fault, Thermal Limit, it's featured.Hot-swappable device should work if you use a -80V~-20VV power source.The programmable features of this device are Circuit Breaker, Current Limit, OVP, UVLO.Hot-swappable device is estimated that there is a current supply of 700μA.The supply voltage (Vsup) should be kept above 20V for normal operation.Vsup (maximum supply voltage) is set to 80V.
MAX5939FESA+ Features
The terminal position of 8
Features of Fault Timeout, Latched Fault, Thermal Limit
Programmable features of Circuit Breaker, Current Limit, OVP, UVLO
MAX5939FESA+ Applications
There are a lot of Rochester Electronics, LLC MAX5939FESA+ hot swap controllers applications.
- Datacom
- Active current limit
- Automotive circuits
- Temperature monitor output
- Server backplane system
- Remote access server
- Supply voltage monitoring
- Firewire
- Avionics systems
- Electric vehicle