MAX5929BEEG+
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | VariableSpeed/BiLevel™ |
| Feature | Fault Timeout, Latched Fault |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Type | Hot Swap Controller, Sequencer |
| Applications | General Purpose |
| Technology | BICMOS |
| Voltage - Supply | 1V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Pin Count | 24 |
| Supply Voltage-Max (Vsup) | 15V |
| Supply Voltage-Min (Vsup) | 1V |
| Number of Channels | 4 |
| Adjustable Threshold | NO |
| Current - Supply | 2.5mA |
| Internal Switch(s) | No |
| Programmable Features | Circuit Breaker, Current Limit, UVLO |
| Feature Pins | BIAS, IN1, IN2, IN3, IN4, MODE, ON1, ON2, ON3, ON4, STAT1, STAT2, STAT3, STAT4 |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX5929BEEG+ Overview
You can find it in the 24-SSOP (0.154, 3.90mm Width) package.At the moment, there are 4 channels available.Tube-shaped packaging is used.24 terminations are present in total.A device's terminal position is DUAL.The device has a total of 24 pins.With a supply voltage of 3.3V, high efficiency is possible.This is set up in the same way as Surface Mount.Hot-swappable device is classified as a Hot Swap Controller, Sequencer electrical component.A temperature setting of -40°C~85°C will ensure reliable operation.Application General Purpose is available on the device.The article appears in Fault Timeout, Latched Fault.In the case of a 1V~15VV power source, it should work just fine.Its programmable features are Circuit Breaker, Current Limit, UVLO.Hot-swappable device is estimated that there is a current supply of 2.5mA.Normally, Vsup should remain above 1V.Vsup is set to 15V, the maximum supply voltage.VariableSpeed/BiLevel? series components are used in this electrical component.
MAX5929BEEG+ Features
The terminal position of 24
Features of Fault Timeout, Latched Fault
Programmable features of Circuit Breaker, Current Limit, UVLO
VariableSpeed/BiLevel? series
MAX5929BEEG+ Applications
There are a lot of Rochester Electronics, LLC MAX5929BEEG+ hot swap controllers applications.
- Redundant-array-of-independent-disk (RAID) storage
- Current monitoring
- Circuit breakers for electronic circuits
- Automatic restart after load failure
- Short-circuit protection in real time
- Storage network
- Disconnect faulty loads before supply voltage drops
- Circuit power protectors
- Board or blade insertion into live backplanes
- Telecommunications