MAX516AEWG+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 650mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 4.75V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX516 |
| Pin Count | 24 |
| Output Type | CMOS, TTL |
| Number of Elements | 4 |
| Power Supplies | 5/15V |
| Nominal Supply Current | 10mA |
| Max Supply Current | 10mA |
| Propagation Delay | 1.5 μs |
| Quiescent Current | 10mA |
| Turn On Delay Time | 800 ns |
| Response Time | 800 ns |
| Voltage - Supply, Single/Dual (±) | 4.75V~16.5V |
| Supply Voltage Limit-Max | 17V |
| Input Bias Current | 300nA |
| Input Offset Voltage-Max | 10000μV |
| Current - Input Bias (Max) | 0.3μA @ 16.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX516AEWG+T Overview
For convenience, it is packaged in 24-SOIC (0.295, 7.50mm Width) .The comparator has a CMOS, TTL output.We ship the part through Tape & Reel (TR) .There are 24 terminals on the comparator.The electrical component in this case belongs to the Comparator family.With a voltage of 4.75V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .This is a 4 element comparator.Electronic comparator has 24 pins.In general, mounting type Surface Mount is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.You can find more pin-to-pin solutions for your special requirements by searching MAX516 .A quiescent current of 10mA is displayed by this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal use of the device should require a nominal supply current of 10mA .A current supply greater than 10mA may result in the comparator malfunctioning.This device requires 5/15V power supplies to operate.
MAX516AEWG+T Features
CMOS, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 10mA
MAX516AEWG+T Applications
There are a lot of Maxim Integrated MAX516AEWG+T linear comparators applications.
- Battery-Powered Electronics
- Portable and Battery-Powered Systems
- DC/DC and AC/DC power supplies
- Motor drives
- Infotainment and Clusters
- Battery management and protection
- High-Speed Differential Line Receiver
- Appliances
- Automotive
- Analog front end