MAX5055BASA+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Base Part Number | MAX5055 |
| Pin Count | 8 |
| Max Output Current | 4A |
| Power Supplies | 4/15V |
| Nominal Supply Current | 2.4mA |
| Input Type | Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 85ns |
| Fall Time (Typ) | 75 ns |
| Turn-Off Delay Time | 35 ns |
| Rise / Fall Time (Typ) | 32ns 26ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.07 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.1V |
| Turn Off Time | 0.07 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5055BASA+T Overview
The 8-SOIC (0.154, 3.90mm Width) package offers greater flexibility.The packaging method is indicated by Tape & Reel (TR).The configuration is supported by 2 drivers.Surface Mount is mounted in the way.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4V~15V supply voltage.The gate type on this device is N-Channel MOSFET.There is a temperature range for this device of -40°C~150°C TJ.The input type for this program is Inverting.There are 8 terminations to form the base of its configuration.The base part number MAX5055 refers to a number of related parts.Surface Mount is the way it takes to mount the device.In the device, there are 8 pins.In addition, it is specifically designed to operate with a supply voltage of 4.5V.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible to achieve a maximum output current of 4A.Several electronic components are included in its subcategory of MOSFET Drivers.On the board, there are 8 component pins.Considering its maximum power dissipation, 471mW shows its maximum capacity to transfer and conduct power loss without overheating.With its power supplies of 4/15V, it solves the problems of power supply for a variety of applications.
MAX5055BASA+T Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 471mW
MAX5055BASA+T Applications
There are a lot of Maxim Integrated MAX5055BASA+T gate drivers applications.
- Isolated Gate Driver Supplies
- Automotive Applications
- High-speed communications
- Telecom switch mode power supplies
- White Goods - Air Conditioner, Washing Machine,
- General Purpose 3-Phase Inverter
- PCMCIA applications
- Smart Phones
- Video amplifiers
- High-voltage isolated DC-DC converters