MAX4731EUA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4731 |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 11V |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 20pF 20pF |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 85ns, 45ns |
| Charge Injection | 7.5pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -108dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 60ns |
| Voltage - Supply, Single (V+) | 2V~11V |
| Normal Position | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX4731EUA+ Overview
The electrical component comes in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tube. In Surface Mount, this analog switch is mounted. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -40°C~85°C TA extended. In total, there have been 8 terminations. High-quality output is provided by the electronic component's 1 channels. An 3V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 8 pins. Multiplexers built on a SPST - NO switching circuit are built. There are 2 circuits in this multiplexer. If you are looking for variants of the digital switch, trying search with MAX4731. You can find the functions of the 8 pins in the datasheets. This switch device is a typical Multiplexer or Switches. This analogue multiplexer requires a voltage of 2V~11V when it drains from a single voltage supply. In this switch multiplexer, there are SEPARATE OUTPUT outputs available.
MAX4731EUA+ Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 300MHz
MAX4731EUA+ Applications
There are a lot of Maxim Integrated MAX4731EUA+ Analog Switches & Multiplexers ICs applications.
- High speed data transmission line cards
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- High-Voltage
- PCMCIA cards
- SONET/SDH ADM
- Video signal routing
- High reliability control systems
- Switching Systems
- Industrial and process control systems
- Digital Cross-Connects