MAX4685EUB+T
| Parameters | |
|---|---|
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4685 |
| Output | SEPARATE OUTPUT |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-G10 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.3V |
| Power Supplies | 3V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| On-State Resistance (Max) | 800mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 64 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 84pF 37pF |
| On-state Resistance Match-Nom | 0.06Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 50ns, 30ns |
| Charge Injection | 200pC |
| Channel-to-Channel Matching (ΔRon) | 60m Ω |
| Crosstalk | -68dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60ns |
| Switch-off Time-Max | 40ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
MAX4685EUB+T Overview
Presented in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature around -40°C~85°C TA extended. Total terminations are 10. Due to its 2 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. The electronic part body is injected with 10 pins. Multiplexers built on a SPDT switching circuit are built. There are 2 circuits in this multiplexer. Using the MAX4685 search parameter, you can discover variants of the switch. It is a typical Multiplexer or Switches analog multiplexer. This analog switch requires a voltage of 1.8V~5.5V to drain from a single voltage supply. This analog switch ic utilizes SEPARATE OUTPUT output.
MAX4685EUB+T Features
2 Channels
Switch Circuit: SPDT
MAX4685EUB+T Applications
There are a lot of Maxim Integrated MAX4685EUB+T Analog Switches & Multiplexers ICs applications.
- Cell phones
- Battery Powered Instruments
- Channel Banks
- Cable Modem
- SONET/SDH ADM
- Medical systems
- Central office
- Fiber In The Loop (FITL)
- Digital cross connects (DSX-1)
- PDAs