MAX4625EUT-T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Additional Feature | IT CAN ALSO OPERATE WITH 3 V SUPPLY |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4625 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-G6 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Number of Bits | 4 |
| On-State Resistance (Max) | 1Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 57 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 32pF |
| On-state Resistance Match-Nom | 0.06Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 50ns, 50ns |
| Charge Injection | 65pC |
| Channel-to-Channel Matching (ΔRon) | 60m Ω |
| Crosstalk | -57dB @ 1MHz |
| Switching | MAKE-BEFORE-BREAK |
| Switch-on Time-Max | 50ns |
| Switch-off Time-Max | 50ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Drain to Source Resistance | 1Ohm |
| Length | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4625EUT-T Overview
Presented in SOT-23-6, this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operational temperature extended around -40°C~85°C TA. In total, 6 terminations have occurred. The electronic part delivers high-quality output through its 1 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. An electrical component of this type can be found in the 6 series. SPDT switching circuits are used in these analog switch ics. Circuits number 1 make up this analogue multiplexer. Try searching for MAX4625 variants of the analog switch ic. Theswitch device is a typical Multiplexer or Switches. Analogue multiplexers require a 1.8V~5.5V voltage to drain from a single voltage supply. There is also IT CAN ALSO OPERATE WITH 3 V SUPPLY to look out for in this electronic part. It has a Drain to Source resistance of 1Ohm ohms. It can conduct in a 4-bit manner.
MAX4625EUT-T Features
1 Channels
Switch Circuit: SPDT
Additional Features: IT CAN ALSO OPERATE WITH 3 V SUPPLY
Drain-to-Source resistance: 1Ohm
4-Bit
MAX4625EUT-T Applications
There are a lot of Maxim Integrated MAX4625EUT-T Analog Switches & Multiplexers ICs applications.
- SDH
- Channel Banks
- E1 Multiplexer
- High-Voltage
- Avionics
- PBX interfaces
- Communication systems
- Multiplexers
- Precision test equipment
- Isolation