MAX4580CAE+
| Parameters | |
|---|---|
| Factory Lead Time | 11 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4580 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 1.25Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 53 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 115pF |
| On-state Resistance Match-Nom | 0.25Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 160ns, 210ns |
| Charge Injection | -60pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -65dB @ 1MHz |
| Height Seated (Max) | 1.99mm |
| RoHS Status | ROHS3 Compliant |
MAX4580CAE+ Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SSOP (0.209, 5.30mm Width). High reliability is ensured by the advanced packaging method Tube. A switch device like this is mounted in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to 0°C~70°C TA. Total terminations are 16. A 1 channel electronic part produces high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. It is injected into the electrical part body with 16 pins. SPST - NC switching circuits are used in these analog switch ics. There are 2 circuits in this switch device. MAX4580 can be used to search for analog multiplexer variants. You can find the functions of the 16 pins in the datasheets.
MAX4580CAE+ Features
1 Channels
Switch Circuit: SPST - NC
MAX4580CAE+ Applications
There are a lot of Maxim Integrated MAX4580CAE+ Analog Switches & Multiplexers ICs applications.
- Signal routing between systems
- Multiplexers
- RGB switches
- SONET/SDH ADM
- PDAs
- Medical
- Industrial
- Voice over IP/DSL – Integrated Access Devices, Smart
- Transmit
- Avionics test equipment